• v0.1.20 52b442feff

    WarpAxe v0.1.20
    All checks were successful
    CI / Rust checks (push) Successful in 45s
    CI / Regulator scenarios (push) Successful in 47s
    Stable

    dvb-projekt released this 2026-10-07 08:45:33 +00:00 | 414 commits to main since this release

    T-Display-S3: about 290 kH/s instead of 230. WarpAxe ran every ESP32-S3 at 160 MHz, while the T-Display-S3's display and API claimed 240 MHz. The experimental T-Display-S3 now really runs its CPU at 240 MHz and shows the clock it runs at. On our board the hash rate went from about 237 to 293 kH/s (+24 %) and the chip temperature from 57 to 60 °C, far below its 85 °C pause. Boards with chips are unchanged.

    ⚠️ The T-Display-S3 gets to about 60 °C on its back while it hashes: put it in a case, and don't hold it in your hand while it mines.

    Also in this release:

    • The System page showed the running partition as "?" when it was first asked right after a start; it now shows the slot.

    One image for every supported board: warpaxe.bin, warpaxe.bin.sha256, warpaxe.bin.sig, tested-on.txt; for the first install warpaxe-factory.bin and web-flasher.tar.gz (checksums in install.sha256).