• v0.1.26 cdba4db3d0

    WarpAxe v0.1.26
    All checks were successful
    CI / Rust checks (push) Successful in 51s
    CI / Regulator scenarios (push) Successful in 1m2s
    Stable

    dvb-projekt released this 2026-10-12 16:23:17 +00:00 | 330 commits to main since this release

    What does your power supply deliver? Settings has a new field for the power supply's rating in watts (optional, on boards with a regulator). The dashboard asks for it until it is set; the notice links to the field and can be dismissed. The API gives it as psuWatts, so a tuner can stay below it: WarpTune from v1.39.3 takes its 80 % limit from there when its own configuration sets none, and searches for a higher clock only with a limit known. The stock firmware has a fixed maximum per board instead, which says nothing about the supply that is actually plugged in.

    Input and core on rows of their own. The dashboard's power card shows the input voltage, the core voltage and the core current each on its own row. The input current appears only where the board measures it, and as an estimate (≈) on the NerdAxe. A Bitaxe's 40 A no longer read as if they came from the power supply.

    Also in this release:

    • README: the comparison with the stock firmware checked again against AxeOS v2.15.3 and NerdOS v1.1.0.1, with new rows for rollback, pool changes without a restart, chips off and on, the clock and the power supply's rating; new screenshots.
    • docs/04 states its result at the top.
    • New UI strings reviewed by native speakers.

    One image for every supported board: warpaxe.bin, warpaxe.bin.sha256, warpaxe.bin.sig, tested-on.txt; for the first install warpaxe-factory.bin and web-flasher.tar.gz (checksums in install.sha256).