• v0.1.34 18cbd6a614

    WarpAxe v0.1.34
    All checks were successful
    CI / Rust checks (push) Successful in 1m1s
    CI / Regulator scenarios (push) Successful in 56s
    Stable

    dvb-projekt released this 2026-10-21 13:45:39 +00:00 | 239 commits to main since this release

    WarpTune users: update to v1.42.1 first. WarpTune v1.42.0 can no longer read a miner once a self-test has run on it, and stops tuning it. Versions up to v1.41 are not affected.

    Self-test. System → Run self-test checks the miner while it mines, in about 80 seconds: the number of chips, the hashrate of every chip and every domain, the error rate, the core voltage against its setting, the regulator, the fans (ten seconds at full speed, then the automatic fan control takes over again), the temperatures against their stop lines and the input voltage. Each check gets a ✓ or ✗ with its measured value (a dash if the board lacks the part), in the web UI, on the device display and in the API (/api/v1/selftest). The test ends by itself if the clock or voltage changes during the run, and WarpTune (from v1.42.1) holds back while it runs. Tested on a Bitaxe Gamma, a NerdQAxe++, a BitForge Nano and a NerdAxe Gaia. We recommend running it once after installing WarpAxe.

    A diagnostics file for support. System → Download diagnostics file gives you one file with everything we need to help: firmware and board, the last self-test, hash counters, pool status, regulator and temperatures, memory, the event log, recent settings changes and the last log lines. Passwords are never in it, and wallet addresses and the Wi-Fi name are masked. If something seems wrong, run the self-test, download the file and send it to us on Discord.

    An event log that survives restarts. The last 32 important events (restarts with their reason, overheat stops, regulator faults, pool switches, updates and rollbacks, silent chips, self-test results) are kept across restarts and shown under System. They are written only when something happens, never periodically.

    A notice after a crash. If the miner restarted because of a panic or the watchdog, the web UI shows a banner with the reason and the time, a button for the diagnostics file and, if this crash wrote one, a button for its core dump. If the crash wrote none, the banner says so, and the Diagnostics card marks a dump still in flash from an earlier crash or another firmware version as such instead of passing it off as this crash's. The banner stays until you dismiss it.

    A smaller image. The firmware no longer carries Rust's backtrace symbolizer, which could only print addresses on the miner anyway: about 125 KB less, so the new features fit with room to spare. Panic messages and the core dump stay.

    New strings in eight languages, translated by native speakers and read by independent editors. Details: docs/10-Self-test-diagnostics-and-event-log.md.

    One image for every supported board: warpaxe.bin, warpaxe.bin.sha256, warpaxe.bin.sig, tested-on.txt; for the first install warpaxe-factory.bin and web-flasher.tar.gz (checksums in install.sha256).